Vulcan-materials C24EA10 Manuel d'utilisateur télécharger pdf (Page 18)

— 18 —

C24EA SERIES ELECTRIC CONVECTION STEAMERS

SYMPTOMS

Steamer not steaming

Steamer not heating/

steaming properly

Door leaks

Water accumulates in

compartment

Water not being supplied

to generator

Steam is exiting from under

steamer

POSSIBLE CAUSES

No main power source

Power switch in off position

Door open

Water not being supplied to

steamer

Excessive lime build up in the

steamer

Damaged door gasket

Improper drain

Drain clogged

Damage to gasket sealing surface

Plugged drain or screen

Unit not leveled properly

Drain clogged

Water supply valve is off

Water pressure low

Water filter is plugged

Valve inlet screen clogged

Generator pressure is too high

REMEDY

Check the power source or circuit

breaker.

Press power switch to the on

position.

Close door.

Refer to symptom WATER NOT

BEING SUPPLIED TO

STEAMER.

Descale the steamer (see

REMOVAL OF LIME SCALE

DEPOSITS).

Check door gasket for damage.

If adjustment is needed, contact

your Authorized Vulcan-Hart

Servicer.

Clear compartment cavity screen.

If symptom persists, contact your

Authorized Vulcan-Hart Servicer.

See leveling instructions in the

INSTALLATION section of this

manual.

Unclog drain.

Turn valve on.

Check water supply pressure.

Refer to water filter manual. If

symptom persists, contact your

Authorized Vulcan-Hart Servicer.

Contact your Authorized Vulcan-

Hart Servicer.

Contact your Authorized Vulcan-

Hart Servicer.

TROUBLESHOOTING

1 2 ... 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire