Vulcan-materials GTS12-2 Manuel d'utilisateur télécharger pdf (Page 10)

-

10 -

4. Securely tighten the mounting bracket

system assembly bolts at the left and

right side mounting brackets.

Fig. 4.

5. Check that the left and right mounting

brackets have not moved from position

while the assembly bolts were

tightened. The “F” clamps should still

be in place to prevent the assembly

from moving while drilling holes in the

chassis.

Check before drilling holes in chassis, it

is important that the assembly has not

moved from the location prescribed in

step # 3

6. Using the side mounting bracket as a

guide, drill holes into the griddle chassis

with the 5/32” bits only at the highest

hole and the hole nearest the front of

the unit on the side bracket. See Fig. 5

and Fig 6. Repeat procedure for

opposite side of bracket system

assembly.

7. Insert and tighten 10-24 x ½ screws into

the holes that were drilled in step 6.

Repeat procedure for opposite side of

bracket system assembly. See Fig. 6.

Fig. 4

Fig. 5

Fig. 6

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Commentaires sur ces manuels

Pas de commentaire